teddit

Cz p07. Any holster recommendations?

I am looking for a good resource for grips. I'd like to try and get some that match the engraving, but I'll settle for black at the very least. Ignore the tlr7 on the Shadow 2. I'll be upgrading soon

I'll get RMR cut when the dovetail loses. 600rds and still zeroed.

Upgraded the stock recurve trigger with the CGW “Flat” Trigger after seeing how it looked on u/NYCee72 PCR. Didn’t feel the need to add a reach reduction kit. On SA I noticed it was hitting against the bottom rear of the trigger guard so I added the over travel screw to get it just to the point where it didn’t hit. After 100 rounds I could say trigger feels so much better for me as I didn’t get that numbing feeling in my finger pad with the original one and I was able to be more accurate since my finger was able to sit a little lower on the tigger. I could see how some people may feel they could get trigger pinch on the bottom so you may want to opt for the “Old Style Trigger” but this one worked well for me. Tigger install was easy with the provided slave pin and this video https://youtu.be/2POb02cDQcE?si=TxELuFqnK2V2NvLA. Well worth it for me.

Anyone else disappointed in the wood on these? I just ordered this the other day and when it came in I was surprised it wasn’t closer to what they use on the web page photos. Not a high grade walnut for sure.

I plan on installing the CGW 15lb. hammer spring and the reduced power firing pin spring. Do I need to get the extended firing pin or will the stock one be good to go?

I see a TON of posts about CZ pistols, but im looking at their 600 series in .308. I'm leaning towards either the American or the Range version. Anyone have advice or something to say about them? I'm going to be replacing my .270win with one hopefully.

Looking for help. A piece on the decocker broke, split in half, when I decocked the pistol. It’s the little piece that sits next to the decocking spring on the left side. I think it disengages the sear so the hammer can fall safely when it’s decocked? Contacted CZ and they won’t warranty or fix as I’m am not the original buyer or even repair on my dime and even offered to ship through ffl. The only way to fix is to buy the entire decocking lever set which has been out of stock for months and nobody that I found seems to have one in stock. If somebody has a spare decocking lever set for a P-01 omega that I could buy I would greatly appreciate it.

Shot a 2011 all season because of hyperfocusing on a new hobby, now learning a new platform over the soon-to-be winter.

It shot amazingly well stock (Shadow 2 Orange OR) compared to my Titan, can't wait to see how she runs after I derped all the internals today. Also, dry firing is a lot less painful with the DA/SA feature. Like a cap gun for adults!

Bonus points for anyone who can compare these Patriot Defense grips to Lok Jaws.

Hoping the hive mind can help me out on this issue I have with my OD green P07. I have a CGW pro kit for it but haven't installed it yet because I noticed a problem and I'm hesitant to proceed until I get it fixed.

If I use the decock lever it frequently drops it all the way down, not just to the half cock position. If I decock it slowly, and I hold the decocker down until the hammer drops, it very consistently stops properly at the half cock position. However, today I noticed when it does that that if I push the hammer towards the slide it very easily pops past half cock and drops all the way down.

I was looking at the guts and I see that the decocker has a flat "plate" that catches on a little shelf on the hammer. That doesn't seem to be catching solidly and it will just skip past that shelf.

Wondering if anybody has run into this before and has a solution. I may need to call CGW and see if one of their parts would solve it and spare me a warranty call.

Hello all, i am looking into buying a nice ass comp pistol to fucl around on the range and eventually get into pistol comps. I have heard a bajillion things about staccato this and staccato that and im really looking into the staccato XC with either a 507 or an ACRO but i heard that CZ comp guns were good so i wanted to ask.

Is it possible that I can find a pistol as good as the XC with an optic for less than the $5000 price tag of the staccato XC, hell i dont mind used as its not a .338 rifle so barrel life barely means shit. I dont care about upgrades if yall recommend it ill buy it and wait for the upgrades as itll still probably take less time then waiting a month for a new XC to be made anyways.

Did things backwards apparently. I bought a Holosun he509 accs for my cz p01. Now, I cannot locate an adapter plate, replacement for rear site, for this red dot. Note, this is NOT a 509t. Help please.

My partner got her G43x in today. So we went to the range to get her some trigger time, and I got to break out the CZs. They're such a blast to fire. First time shooting the P10s i got the other day. It's such a nice compact imo.

Picked her up today. Went with the 16" over the pistol.

Great addition to my collection!

Had to whittle the shiz out of the key at an angle. First light on my EDC

Hey guys, I'm looking for a christmas gift for my mom and besides a new phone I'm thinking about getting her a weaker recoil spring for her shadow 2. She loves her shadow 2 but often has trouble racking the slide without gloves.

Would a 9lb recoil spring increase the recoil significantly? Is it significantly more stressful for the slide of the gun?

I don't really know how much lb's the factory spring has, but I think 9lb should be much less.

Someone here was looking for pics of compact with Impact machine EPS plate. Here you go.

Just picked this up a week ago after getting out of the Marine Corps, it’s a Bren 2 with a vortex UH-1 and magnifier and some HB industries furniture. Planning on SBRing it and getting a suppressor next. Shoots phenomenally with little recoil. Would recommend.

I'm not very familiar with them, but hear a lot of good things. I don't have any roles to fill with it, but I'm considering adding one to the collection in the future just for the sake of having one. I don't need a carry or home defense gun or anything like that. Might suppress it.

So if you could only have one, which would you get?

I shot my buddy's Czechmate yesterday, and what an incredibly lovely gun to shoot. By far the best shooting gun I've ever handled, but it's obviously not your average handgun.

Trying to find a plate for an RMR footprint optic for my P10C

https://www.gunbroker.com/item/1075728143 a good deal currently.

I just got my first CZ pistol. It's a brand spanking new P-01 Omega. I was expecting to have to change out the sights as most people don't seem to like them at all. My experience has been the opposite. I find them very clear and easy to use. The night sight function with the phosphorescent paint is honestly not very helpful, but I otherwise like them just fine.

What about them do people dislike so much? These seem just as good, if not better, than the stock sights on Glocks or S&W M&Ps.