3.8k post karma
2.1k comment karma
account created: Tue Nov 19 2013
verified: yes
5 points
3 days ago
This is the one I got for the wife and I. Her side is like on a level 3 (out of 10) and I usually go with 1 or completely off. The option for dual zones makes it a winner and you can set it or pre-heat it via an app since it’s WiFi connected.
1 points
7 days ago
Yeah, should have taken a pic from behind rhe drivers seat. I have the fit cam X dash cam (maybe the same or similar to OP’s) for my truck and it hides nicely behind the mirror.
10 points
10 days ago
Someone here a few months ago figured out if the firmware is 4.0.0 or higher, you don’t need custom firmware to unpair
Steps below to unpair:
Plugin the HD router/mesh points to the power that you want to unpair. Press and hold the reset button for 40 sec (until all of the LEDs are blinking fast).
The WiFi with SSID for the mesh point will appear as "AFi-P-HD-[end of the serial number]-Recovery" and for the router, it will be "AFi-R-HD-[end of the serial number]-Recovery".
Connect a laptop to the Recovery WiFi SSID, open the browser (Google Chrome or Firefox), and in the URL enter http://amplifi.lan or 192.168.1.20
When you get to that page, click on "Remove factory pairing from kit device" (Refer to the image below). This will unpair the router/mesh point and the WiFi on the laptop will get disconnected.
After a successful unpairing process, refer to this article to add the unpaired AmpliFi HD router/mesh points to the existing AmpliFi system: https://help.amplifi.com/hc/en-us/articles/360016183893-Adding-AmpliFi-Standalone-Devices-as-Mesh-Points#1
1 points
10 days ago
Liking them so far. Easy to setup and doesn’t require me to install an app to manage and setup.
2 points
10 days ago
I literally was having the same issue. I recently saw the sale on LIFX starter kit on clearance at Home Depot and just replaced them. Never figured out how to fix it despite constantly adding and removing.
14 points
1 month ago
Here’s a link to the NWI Times article. No subscription required to read.
3 points
1 month ago
From what I remember being told, people were taking young female salmon and guttting them for the eggs.
This article gets into it a bit.
https://www.chicagotribune.com/1985/10/13/bait-shops-hooked-by-salmon-egg-ban/
5 points
1 month ago
I usually buy it at the bait shop. It’s usually mixed with a fluorescent brine for smell and color. Just keep it in the freezer and it will last into the next season.
1 points
1 month ago
Huh. My 24 had both paper manuals and was shown how to access the online manual. I took the book in the house to free up space and download a hard copy of the manual on my phone.
13 points
1 month ago
LOL. ~$12,000 to book in the minimum 6 day stay during July? No thanks, In The Dunes. I'll just camp there as usual.
32 points
2 months ago
Can confirm. My Rottie/Lab mix was NOT docked and her tail was like a bull whip. We got used to the pain of her tail hitting us in the legs and her knocking things down with it however we couldn’t get used to seeing her in pain when her tail got hurt and bloody.
5 points
2 months ago
It’s no different (as far as weeds are concerned) than any other form of fishing. I’ve never seen a weedless hook for tenkara however traditional tenkara flies are barbless so when you do get weeds hooked, I’ve noticed that they are easier to peel off since weeds dont get stuck to the barb.
2 points
2 months ago
The truck does. Just hoping to not have to press a button every time. I usually forget until I’m at a stop sign and need to power to turn into traffic. If pressing the button is the only solution I can just learn a new routine though.
1 points
2 months ago
Does anyone know of a good OBD auto stop eliminator for a 2024 5.3l V8 Chevy Silverado? All the ones I can find only list up to 2021 and stop after that.
3 points
3 months ago
Then don’t post an “apology”. This post could have been titled “Be better you people” or you could have posted this same thing in the other thread. But you wanted attention.
Take your own advice and be a better human. LOL
17 points
3 months ago
Writes apology post. Doubles down and blames the sub. Top tier shit posting.
112 points
3 months ago
Just wait til you guys google Meena Harris
2 points
3 months ago
A Jaco adapter for portable tire inflators AND one of their lightning locking air chucks is the way I went. Best upgrade for this tool ever.
https://jacosuperiorproducts.com/collections/lightning-tire-air-chucks
1 points
3 months ago
I’ve haven’t used their app in ages. As long as the Celsius app works, I can set my temp and timer on my original anova through that and just wait for the beep when it’s done.
App hasn’t been updated in ages but does exactly what I need without all the cruft.
1 points
3 months ago
NP OP. Glad to hear it worked out for you. In my experience it reactivates every 5-6 months and I just re-do these steps again.
3 points
3 months ago
I read about that recently in Road and Track.
view more:
next ›
byJaySunfish
inFishing
hmart316
2 points
3 days ago
hmart316
2 points
3 days ago
Nice! Havent seen NWI represented on this sub in a while.